![]() If your garage door is still facing issues or you don’t feel comfortable doing repairs yourself, get in touch with the Overhead Door Company closest to you. Need Additional Help? Our Team is Here for You ![]() Tighten the track, then verify that it’s securely in place. The tracks are found on either side of the garage door and above the door, the doors tracks guide the door when opening or closing. Then move the track until there’s only a 1/4- inch gap or less between the door and molding. Rubbingīegin by loosening bolts that secure every track to its lower track bracket using a wrench. Then, use a level to ensure the track is straight up and down. This will help to position it to the correct spot. BindingĪfter loosening the screws that attach the track to the wall, tap the bottom of the track gently with a rubber mallet. Mark the edge of the threshold on the floor at each end and snap a chalk line along your marks. Doing so can lead to the rollers slipping and causing the door to not open or close properly. Gently close the door onto the threshold and square up the hump to meet the door seal. For cleaning the tracks, use a clean cloth or some compressed air but make sure to not grease the track afterward. Again, we recommend getting a repair professional to assist with any replacement needs. Like the springs and cables, look for signs of wear and tear or potential obstructions. Should you find one of these issues, reach out to a garage door repair professional for help as part replacements can be dangerous because of the door’s weight and tension. Given the importance of these internal parts, you’ll want to visually inspect for anything unusual, such as breaks, wear, or warped. Ways to Address Three Common Garage Door Alignment Issues Equipment You’ll Need
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |